2650 Warfield Street Ft Worth, TX 76106 |
Flame Safe FIRE RETARDANT Coatings / Flame RetardantsHotline: 800-333-9197 8am-5pm (CST) Ph: 817-740-9197 After Hours: 817-658-9197 email: fireprod@aol.com |
 Exterior Patio Deck and Rails |
Dallas, Fort Worth, Houston, Austin,South Dallas, North Dallas, Dallas County, Houston, Corpus Christi, San Antonio, DFW metroplex, Dallas - Fort Worth, Abilene, Amarillo, Odessa, Midland, El Paso |
FIRE POLY 75 E |
| UL1256 (SWRI) ASTM E84 |
| ASTM E84 / ASTM 2768 NTERTEK |
| CSIRO Australia AS/NSZS |
EXTERIOR FIRE RETARDANT
COATING or SPRAY
FOR ALL SPECIES EXTERIOR WOOD
PLYWOOD ● LUMBER ● TIMBER
Flame Safe Fire Poly® FP75E is an exterior intumescent fire retardant coating |
| LABEL |
CLASSIFIED
FIRE RETARDANT COATING
SURFACE BURNING CHARACTERISTICS OF APPLIED COATING
| Surface | Douglas fir |
ASTM E84, ASTM E2768, ASTM D2898; CLASS A; UL723, TYPEI; NFPA255; UBC 8-1 |
| Flame spread | 5 |
|
| Smoke developed | 115 |
|
| One coat @ (ft2/gal) | 166 - 200 |
|
| Number of fire retardant coats | 1 |
|
| Rate per coat (ft2/gal) | 200 |
|
| Number of overcoats | None |
FIRE POLY FP75E |
TECHNICAL DATA INTERIOR / EXTERIOR CLASS A RATING CLEAR FIRE RETARDANT COATING |
|---|
PRODUCT DESCRIPTION: Aqueous Based Resin
| PRODUCT ANALYSIS | ||||
|---|---|---|---|---|
Total Solids |
52% | PH | 2.2 - 2.5 |
|
Weight per gallon |
11.5 lbs | Flash point | Non-Flammable |
|
Specific gravity |
1.38 | Color | Water clear at 78°F. - Slight haze at 50°F. or lower |
|
Volatability |
Non-Volatile | Solvents | Water(Contains no petroleum or derivatives of petroleum) |
|
Anti-Fungus |
excellent Resistance | Bacterial | Good Resistance |
|
Linear shrinkage |
None | Moisture Absorption | None |
|
Corrosive |
Mildly | Toxic | None (when dry) |
|
Insects, rodents, aspergilli And other types of molds |
Excellent resistance | Termites | Excellent resistance |
|
Preservative for wood |
Good | Scrubability | 1000 cycles |
|
RECOMMENDED USE: Interior/Exterior Class A Rating (Flame spread less than 25)
FLAME SAFE FIRE POLY75E is a clear fire retardant coating. It can be used on any type of wood, porous, or non-porous materials, such as:
| Yellow pine | Redwood | Cedar | Douglas Fir |
| Ponderosa Pine | Walnut | Poplar | Reclaimed wood |
| Cyprus | Plywood | Teak | Barnwood |
| Mahoghany | Hardwoods | Softwoods | Wood Decks |
ENVIRONMENTAL REGULATION:
This product complies will U. S. Federal Regulations concerning the use of lead in paint and hydrocarbon emissions.
QUICK REFERENCE FOR APPLYING FIRE POLY FP 75E
| Material | Exterior / Interior fire retardant for any type of wood and wood products |
| Application | Treat before, during or after construction.
|
| Coverage | Apply one (1) coat at the rate of 166 to 200 sq.ft. per gallon depending on substrate. |
EXTERIOR / INTERIOR WOODS All surfaces to be treated must be clean
and dry. Fire Poly 75 E fire retardant coating is water-based, clear liquid that
becomes insoluble when dry.
Fire Poly 75 E
also acts as a preservative, and water proofing agent ultra violet inhibibor, mold and mildew protector and repels insects.. If over coating is intended, Fire
Poly 75 E is an excellent surface primer for use under
latex paints or can be use as a finished coat overwater based stains. When applied according to the manufacturer specifications, Fire Poly FP75E is warranted for 5 years or 200 inches of rain whichever comes first. It should be noted that unlike some
products, materials treated with Fire Poly 75 E fire retarant coating
require no special cutting tools or special
fasteners. Contact parts of any equipment
should be stainless steel or plastic to prevent
chemical reaction and breakdown. Storage
may be done in polyethylene containers. |
Exterior Fire retardant for plywood Exterior Fire Retardant for Wood
|
|---|
| THE BEST FIRETARDANT AVAILABLE |
Marine |
|
|---|
A clear fire retardant for wood siding, soffits & timbers - 5 year warranty FEMA approvedCall for pricing and ordering 1-800-333-9197 |
HOME | CONTACTS | PRODUCTS | Fire Poly FP75E MSDS | TESTING